SYSTEM 22. NBS SPECS - SLIDING DOOR

General: All sections to be extruded from aluminium alloy specification 6060/6063 T6 complying with BS EN 755-9:2001. Aluminium profiles to be manufactured to BS EN 1509001/9002.

The fabricated product to conform with BS 4873.

The glass/framing sections to withstand the design wind loading calculated in accordance with BS 63099 pt2: 1995.

System: Thermally broken outer frame sections mounted on a formed 4mm thick aluminium cill with welded stopped ends.Thermally broken glazing sections bonded to structurally calculated insulating glass units.

  • MAXIMIUM PANEL WIDTH        3500mm
  • MAXIMIUM PANEL HEIGHT       3500mm
  • MAXIMIUM PANEL WEIGHT      350kgs

(Units exceeding 2.4m in both directions are subject to extended lead times.)

Standard glazing details: Hermetically sealed double glazed units to BS6262, BS EN 12600, BS5713 with black spacer bars and a P.I.B primary seal and silicone backing seal 32/34mm thick with a 16mm Argon filled cavity.

Incorporating: An outer pane of 10,12 or 15mm toughened float glass and an inner pane of 6 or 8mm toughened soft coat low-E glass.

Glass to be toughened to BSEN 12150.

Ironmongery and fittings: 75mm stainless steel rollers with needle bearings mounted in an enclosed carrier case. 300mm long stainless steel ā€˜Dā€™ handles on purpose made steel brackets.

Fully rust proofed deadlock operated by Euro cylinder.

SYSTEM 22. NBS SPECS - PIVOT DOORS

General: All sections to be extruded from aluminium alloy specification 6060/6063 T6 complying with BS EN 755-9:2001.

Aluminium profiles to be manufactured to BS EN 1509001/9002.

The fabricated product to conform with BS 4873.

The glass/framing sections to withstand the design wind loading calculated in accordance with BS 63099 pt2: 1995.

System: Thermally broken outer frame sections mounted on a formed 4mm thick aluminium cill with welded stopped ends.Thermally broken glazing sections bonded to structurally calculated insulating glass units.

  • MAXIMIUM PANEL WIDTH        1200mm
  • MAXIMIUM PANEL HEIGHT       3000mm
  • MAXIMIUM PANEL WEIGHT      135kgs

Standard glazing details: Hermetically sealed double glazed units to BS6262, BS EN 12600, BS5713 with black spacer bars and a P.I.B primary seal and silicone backing seal 32/34mm thick with a 16mm Argon filled cavity.

Incorporating: An outer pane of 10 or 12mm toughened float glass and an inner pane of 6 or 8mm toughened soft coat low-E glass.

Glass to be toughened to BSEN 12150.

Ironmongery and fittings: Doors are hung on Dorma BTS75 Floor springs incorporating a Dorma adjustable pivot at the head. Stainless steel 19mm diameter ā€˜Dā€™ handles 300mm long mounted on purpose made stainless steel brackets.

Shear Mag locks to head and in the bottom rail a fully rust proofed deadlock operated by Euro cylinder.